Product ID:R-373 RUBBER INSUL ADHESIVE, 373
MSDS Date:11/01/1991
FSC:8040
NIIN:01-190-9006
MSDS Number: BLDCT

RUBATEX CORP

805 MONROE ST
BEDFORD, VA 24523
US

Emergency Phone: 703-586-2611

Info Phone: 703-586-2611

Preparer: W.F. CREASY

Cage: IO124

RUBATEX CORP SUB OF GREAT AMERICAN INDUSTRIES INC

340 BEDFORD, VA 24523 US

Telephone: 800-378-4091

Cage: 82942

22

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 16%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

140

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 28%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

186

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 36%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOTE:TOLUENE (108-88-3) APPEARS ON
NAVY LIST OF OCCUP CHEM REPRO HAZARDS. SEEK CONSULTATION FROM
APPROP HLTH PROFS ABOUT LATEST HAZ LIST INFO & SAFE HNDLG & EXPOS
RECOMS . INHAL:DIZZINESS, BREAT HING DIFFICULTY, HEADACHE & LOSS OF
COORDINATION. EYE:SEVERE IRRITATION, TEARING, REDNESS & BLURRED
(EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:VISION. SKIN:CAN DRY & DEFAT SKIN
CAUSING CRACKS, IRRITATION & DERMATITIS. INGEST:CAN CAUSE GI
IRRITATION, VOMITING, NAUSEA & DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESP TRACT IRRIT,
DERMATITIS, NAUSEA, VOMITING.

First Aid:INHAL OVEREXP: MOVE PERSON TO FRESH AIR. IF BRTHG STOPS,
APPLY ARTF RESP & SEEK IMMED MED ATTN. EYE: FLUSH W/LRG QTYS OF
H*2O FOR AT LEAST 15 MIN. SKIN: WASH THOROUGHLY WITH SOAP AND WATER
AND SEE A D OCTOR. INGEST: DO NOT INDUCE VOMITING, CAN CAUSE CHEM
PNEUMONITIS EDEMA. CONTACT A PHYSICIAN IMMEDIATLEY.

Flash Point Method:CC
Flash Point:-14F,-26C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP TO AVOID INHAL OF CONC VAPS. H*2O SHOULD NOT BE USED EXCEPT
AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HNDL AS FLAM LIQ.VAPS FORM EXPLOSIVE MIX
IN AIR BETWEEN UPPER & LOWER EXPLOSIVE LIMITS WHICH CAN BE IGNITED
BY MANY SOURCES SUCH AS PILOT LIGHTS,(SEE SUPP DATA)

Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA AND USE ABSORBANT MATERIAL TO CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE NON-SPARKING UTENSILS WHEN HNDLG
MATL, AVOID HOT METAL SURFS, USE IN COOL WELL-VENT AREAS. KEEP
CONTRS CLSD WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT & OPEN FLAMES. SMOKING
IN AREAS WHERE THIS MATL IS USED SHOULD BE STRICTLY PROHIBITED.
TOOLS USED W/MATL SHOULD BE MADE OF ALUMINUM, BRASS, OR COPPER.
PLASTIC UTENSILS SH OULD NOT BE USED.

Respiratory Protection:WHEN SPRAYING ADHESIVE USE NIOSH/MSHA APPRVD
CARTRIDGE RESP/GAS MASK SUITABLE TO KEEP AIRBORNE MISTS & CONC
BELOW TIME-WEIGHTED THRESHOLD LIMIT VALUES. WHEN USING IN POORLY
VENT & CONFINED SPACES, USE NIOSH/MSHA APPRVD (SEE SUPP DATA)
Ventilation:GEN MECH VENT/LOCAL EXHAUST SHOULD BE SUITABLE TO KEEP VAP
CONC BELOW TLV. VENT EQUIP MUST BE EXPLOSION PROOF.
Protective Gloves:IMPERMEABLE CHEMICAL HANDLING GLOVES.
Eye Protection:CHEM WORK GOG & FULL LGTH FCSHLD .
Other Protective Equipment:USE IMPERMEABLE APRONS & PROT CLTHG WHENEVER
POS TO PVNT SKIN CONTACT. THE USE OF HEAD CAPS WHENEVER POS (SEE
SUPP DATA)
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN WORKPLACE IS
RECOMMENDED.
Supplemental Safety and Health
EXPLO HAZ:OPEN FLAMES, ELECTRICAL MOTORS & SWITCHES. RESP
PROT:FRESH-AIR SUPPLYING RESP OR A NIOSH/MSHA APPRVD SCBA. OTHER
PROT EQUIP:IS STRONGLY RECOMMENDED.

Boiling Pt:B.P. Text:>132F,>56C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.8
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NO
Appearance and Odor:BLUE, OFFENSIVE.

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS AND OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN & POSSIBLE ACROLEIN.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID MIXTURE AND
PLACE INTO METAL CONTAINERS. CONSULT LOCAL, STATE AND FEDERAL
HAZARDOUS WASTE REGULATIONS BEFORE DISPOSING INTO APPROVED
HAZARDOUS WASTE LANDFILLS. OBEY RE LEVANT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.